SPC Hybrid Waterproof Flooring
SPC flooring, also referred to as Stone Plastic Composite flooring, is a prevalent choice for both residential and commercial environments. This flooring type boasts an array of advantages, including its durability, water-resistance, and minimal maintenance requirements. Composed of a composite material that integrates limestone and PVC, SPC flooring exhibits remarkable resilience and stability.
Furthermore, SPC flooring is engineered to replicate the aesthetics of natural materials, such as wood or stone, and is available in a diverse range of colors and textures. Due to its simple installation system and affordable price, SPC flooring is a great choice for those seeking a stylish and practical flooring solution.
Compared with other floor decoration materials, SPC hybrid waterproof flooring has the following advantages:
1. Green and environmentally friendly: The main raw material for the production of SPC hybrid flooring is natural stone powder, which has been tested by the department and does not contain any radioactive elements. It is a green and environmentally friendly new floor decoration material. Any qualified SPC hybrid flooring needs to pass IS09001 international quality system certification and ISO14001 international green environmental protection certification.
2. Ultra-light and ultra-thin: SPC vinyl flooring is only 2-3mm thick and weighs only 2-3kg per square meter, which is less than 10% of ordinary floor materials.
3. Super wear-resistant: There is a special high-tech transparent wear-resistant layer on the surface of the SPC hybrid flooring, and its wear-resistant revolutions can reach 300,000 revolutions. Among traditional floor materials, laminate flooring, which is more wear-resistant, has a wear-resistance of only 13,000 revolutions, and good laminate flooring has a wear-resistance of only 20,000 revolutions.
4. High elasticity and super impact resistance: SPC vinyl flooring has a soft texture and is very elastic. It has good elastic recovery under the impact of heavy objects. At the same time, SPC vinyl flooring has strong impact resistance and is very resistant to damage caused by the impact of heavy objects. Strong elastic recovery without causing damage.
In addition to the above advantages, SPC hybrid waterproof flooring also has the following characteristics: super anti-slip, fire-retardant, does not produce toxic and harmful gases that cause interest, is waterproof and moisture-proof, sound-absorbing and anti-noise, has antibacterial properties, is simple to cut and splice, easy to install and construct, and has a wide variety of designs and colors , acid and alkali corrosion resistance, thermal conductivity and warmth preservation, easy maintenance, environmentally friendly and renewable.
Company Profile
Chiping Jingda Commerce and Trade Co.,Ltd was established in Oct.2013, specialized in manufacturing laminate flooring and SPC flooring. We are located in Liaocheng city, Shandong province, China.
Our factory covers an area of about 68,000 m2 with more than 150 employees. We have 20 laminate flooring production lines and 10 SPC flooring production lines, the capacity is 100,0000 square meters monthly. We have 10 steps quality checking to ensure premium flooring and perfect after-sales service system.
Product Parameters
Product Name | SPC Flooring |
Wearing Layer Thickness | 0.2mm, 0.3mm, 0.5mm, 0.7mm as regular |
Board Thickness | 3.5mm, 3.8mm, 4.0mm, 4.5mm, 5.0mm, 5.5mm,6.0mm |
Size | 600x125mm(24”x5”), |
Finish | UV-Coating |
Surface Texture | Light Wood Embossed, Deep Wood Embossed, Handscraped, EIR |
Installation | Click system(Unilin,Valinge) |
Color | Wood Grain, Marble Grain, Stone, Carpet |
Uderlay Foam | IXPE(1mm,1.5mm, 2mm) or EVA(1mm,1.5mm, 2mm) |
Certificate | ISO9001/ ISO14001/ CE |
Product Structure
1. UV Coating
An UV cured Urethane coating with ceramic bead and crystal coating for enhanced durability, stain resistance and easy care & maintenance.
2. Wear Layer
Transparent vinyl wear layer provides excellent resistance to scuffs and abrasions
3. Decor Film Layer
High resolution printed film delivers vivid effect in wood, stone and abstracts.
4. SPC Core
A rigid core made from powdered limestone, polyvinyl chloride and stabilizers. 100% waterproof core,dimensional stable, strong and durable.
5. Pack Padding
EVA Foam /IXPE Foam Underlay
Production Process
1. Mixing: Mix PVC powder and calcium powder in a ratio of 1:3, and add a catalyst at the same time
2. Extrusion: Press the wear-resistant layer, decorative paper and newly extruded SPC substrate under high temperature and high pressure to extrude long SPC boards, and then cut them into long strips. At this time, demolding is required for 1-2 days, that is, to allow the SPC board to reach a balance with the external environment, so that it is not easy to deform after slotting.
3. UV coating: Apply primer first, cure with UV light, then apply topcoat, and then cure with UV light. Then cool down with cold water to prevent adhesion between boards.
4. Cutting and slotting: There is no separate cutting process. Cutting and slotting are carried out at the same time. Cut the long side first, then the short side.
5. Bottom pad foam: Bottom pad foam is conducive to SPC board quieter. Bottom pads are IXPE and EVA, IXPE is better.
6. Packaging: The last step is packaging. SPC boards are relatively brittle, so they need to be packaged in outer boxes and pallets to ensure that the boards are not easily damaged during transportation.
Packing and Shipping
SPC floor is packed in cartons, and the packing boxes can be customized according to MOQ.
Then the boxes are put into pallets, and the pallets are safe for loading and unloading.
If customers only buy floor, it is enough to choose 20GP container. If customers buy floor and floor accessories, it is usually necessary to load 40GP or 40HQ.
Application
SPC flooring is suitable for a variety of scenarios, like living room, villa, office building,dance classroom, supermarket, hotel, school, store, and more commercial space.
Certification
As a professional flooring manufacturer with 15 years experience,we have various certificate report such as ISO45001,ISO9001, ISO14001, CE,Floor score etc, ensuring high-quality flooring to every customer.
Exhibition
We actively participate in the Canton Fair every year and occasionally attend other international exhibitions. Our booth attracted many potential customers. If you are interested in our products or factory, we warmly invite you to visit our booth.
Frequently Asked Questions
Q1: Are you a manufacturer or trading company?
A1: A company integrated with industry and trade.
Q2: What about the shipping methods?
A2: For urgent order and light weight, you can choose the following express :UPS, FedEx, TNT,DHL,EMS. For heavy weight, you can choose to deliver the goods by air or by sea to save cost.
Q3: What about the payment methods?
A3: We accept T/T, L/C for big amount ,and for small amount, you can pay us by PayPal, Western Union, Money-gram, Escrow and etc.
Q4: How much does it cost to ship to my country ?
A4: It depends on seasons and which country.
Q5: What’s your delivery time?
A5: Usually we produce within 25-30 days after the payment confirmed
Q6: Can I print our logo/bar-code/unique QR code/series number on your products?
A6: Yes, of course.
Q7: Can I order some sample for our testing?
A7: Normally, sample is free, But as for special sample, it needs some expense.
Q8: Can your customize my products in special shape?
A8: Yes, we can offer OEM and ODM
Q9: How can you make sure we will receive the products with high quality?
A9: Our QC team will inspect each batch of products before delivery and all the raw material we use eco-friendly material and meet EU standard and US uniform, we have certificates of CE, ISO,Floorscore.
Related News
Submitted successfully
We will contact you as soon as possible