PVC SPC Flooring
PVC SPC flooring has many advantages that make it stand out among many other floors.
1.100% Waterproof - protect your home from everyday spills and accidents
2. Kid-friendly & pet-friendly
3. Dent- and scratch-resistant - premium AC5 wear rating
4. Ideal for commercial & residential installation in large areas without transitions
The main raw material of PVC SPC flooring is PVC, PVC is an environmentally friendly non-toxic renewable resource. It has been used in daily life, such as tableware, medical infusion bags, and so on, so there is no need to worry about environmental protection. The main component of SPC PVC flooring is natural stone powder, which is tested by the national authoritative department and does not contain any radioactive elements. It is a new type of eco-friendly flooring material. Any qualified PVC SPC flooring requires IS09001 international quality system certification and ISO14001 international green certification.
SPC PVC flooring is recyclable, greatly saving wood usage. This is consistent with the national policy of sustainable development for the benefit of society.
The PVC SPC flooring has a thickness of 3.5mm to 8mm, which has unparalleled advantages for building load-bearing and space-saving in high-rise buildings. At the same time, it has a special advantage in Redecoration and renovation.
There is a special high-tech transparent wear-resistant layer on the surface of the SPC PVC flooring, and its wear-resistant revolutions can reach 300,000 revolutions. Among traditional floor materials, laminate flooring, which is more wear-resistant, has a wear-resistance of only 13,000 revolutions, and good laminate flooring has a wear-resistance of only 20,000 revolutions. So PVC SPC flooring has a service life of more than 20 years.
Company Profile
Chiping Jingda Commerce and Trade Co.,Ltd was established in Oct.2013, specialized in manufacturing laminate flooring and SPC flooring. We are located in Liaocheng city, Shandong province, China.
Our factory covers an area of about 68,000 m2 with more than 150 employees. We have 20 laminate flooring production lines and 10 SPC flooring production lines, the capacity is 100,0000 square meters monthly. We have 10 steps quality checking to ensure premium flooring and perfect after-sales service system.
Production Process
1. Mixing: Mix PVC powder and calcium powder in a ratio of 1:3, and add a catalyst at the same time
2. Extrusion: Press the wear-resistant layer, decorative paper and newly extruded SPC substrate under high temperature and high pressure to extrude long SPC boards, and then cut them into long strips. At this time, demolding is required for 1-2 days, that is, to allow the SPC board to reach a balance with the external environment, so that it is not easy to deform after slotting.
3. UV coating: Apply primer first, cure with UV light, then apply topcoat, and then cure with UV light. Then cool down with cold water to prevent adhesion between boards.
4. Cutting and slotting: There is no separate cutting process. Cutting and slotting are carried out at the same time. Cut the long side first, then the short side.
5. Bottom pad foam: Bottom pad foam is conducive to SPC board quieter. Bottom pads are IXPE and EVA, IXPE is better.
6. Packaging: The last step is packaging. SPC boards are relatively brittle, so they need to be packaged in outer boxes and pallets to ensure that the boards are not easily damaged during transportation.
Product Parameters
Product Name | SPC Flooring |
Wearing Layer Thickness | 0.2mm, 0.3mm, 0.5mm, 0.7mm as regular |
Board Thickness | 3.5mm, 3.8mm, 4.0mm, 4.5mm, 5.0mm, 5.5mm,6.0mm |
Size | 600x125mm(24”x5”), 810x150mm(32”x6”), 1220x150mm(48”x6”), 1220x182mm(48”x7”), 1220x230mm(48”x9”), 1525x182mm(60”x7”), 1525x230mm(60”x9”) |
Finish | UV-Coating |
Surface Texture | Light Wood Embossed, Deep Wood Embossed, Handscraped, EIR |
Installation | Click system(Unilin,Valinge) |
Color | Wood Grain, Marble Grain, Stone, Carpet |
Uderlay Foam | IXPE(1mm,1.5mm, 2mm) or EVA(1mm,1.5mm, 2mm) |
Certificate | ISO9001/ ISO14001/ CE |
Product Structure
1. UV Coating
Ensure superior stain-resistant and water-proof performance,saving maintenance coasts.
2. Wear Layer
Restore the authentic color and embossing, protecting it from abrasion.
3. Decor Film
Regardless of natural wood or stone structure,we offer a variety of pattern choices that will better showcase your personality.
4. SPC Core
Prevent expansion and contraction of the flooring,cover sub-floor imperfection.
5. IXPE Underlay (Optional)
Better sound absorption and excellent underfoot feeling.
Packing and Shipping
SPC floor is packed in cartons, and the packing boxes can be customized according to MOQ.
Then the boxes are put into pallets, and the pallets are safe for loading and unloading.
If customers only buy floor, it is enough to choose 20GP container. If customers buy floor and floor accessories, it is usually necessary to load 40GP or 40HQ.
Application
SPC flooring is suitable for a variety of scenarios,like living room, kindergarten, office,kitchen, children's room, bathroom, and more commercial space.
Certification
As a professional manufacture of flooring, all of our products are with ISO9001, ISO14001, ISO45001, CE and floor score. We provide one-step service, OEM & ODM, customized designs to meet different customer requirements.
Exhibition
We actively participate in the Canton Fair every year and occasionally attend other international exhibitions. Our booth attracted many potential customers. If you are interested in our products or factory, we warmly invite you to visit our booth.
Related News
Submitted successfully
We will contact you as soon as possible